** NISSAN B13 CLUB**

[stunnerz]

or do any one has a full conversion to sell

[Ted_v2]

estimate like 10k more or less

[stunnerz]

dats with labour n everyting

[Ted_v2]

Last time I heard a sr20det was going for like 6500 and a gearbox is like 2500. Then add into the fuel pump setup. Then wiring.

Radiator. Then intercooler and all that fun stuff.
Can't Flintstone the ride so you need some brakes upgrades

Now looking at that it isn't even close to 10k
Nt including labor

[THE SYNDICATE]

between 15k-20k now,if u wanna do it the right way!

[Frankskeet]

i hav a b13 i jus bought so i am jus lookin around to get ideas frm ppl,dont want to look like everybodyelse.simple but effective

[bling1234]

need a b13 fog right side link me price and location

[black start]

fog light real hard to get bro....

[turbohead]

little by little i tryna put together a nice b13, it came with original ga16de 5fwd. i started off with a set of teins coilover right around, rear disc brakes, ad18v up front with pair of slotted and drilled rotors, i did a paint job and added the projector lights which i recommend no one to buy from k&a signs in fyzo. went wit a jet black sleeper look. head gasket blew due to the failure of teh back hose on the engine dat was when i upgraded to the p11 sr20de small spline box. everything original no fabrication. i added some r33 gtr seats up front, went 2 1/4" straight exhaust with resonator and a jasma barrel which i got from 7831 performance, best parts at best price. car not in the best look right now due to rain. will post some pics as soon as i wash up and stuff. oh an sits comfortably on some bridgestone dhs rims again from 7831... all work done on vehicle was done by me except for wiring the ecu. car is a fun joy ride...

[black start]

^nice....ga16de does do wonders

[THE SYNDICATE]

turbohead,nice ride bro.

imagine the 16de under 5psi. hmmmm.....

[turbohead]

i swapped out for sr20 out of a p11.. i was getting some radiator issues wit the original b13 so i swapped out and instead of getting a metal ugly looking ting i opted to go wit a mishimoto from peak performance...now i have no problems...

[Frankskeet]

ok ppl ah hav ah b13 wit ah b14 engine,fresh tuh de game so am open tuh takin schoolin.not really up fuh de speed jus wat tuh look simple but effective

[randym]

ok ppl i have a b13 with a sr20det red top , lsd box ,front mount intercooler and most important it looks normal.

[N&A AUTO]

ok ppl i have a b13 with a sr20det red top , lsd box ,front mount intercooler and most important it looks normal.

pics?

[mr_sweett]

hi
i'm looking for an exhaust manifold for d ga16de.

[black start]

hi
i'm looking for an exhaust manifold for d ga16de.

498-0985-kiran

[benfu2]

Hey fellas anybody have a b13 trunk with ah spoiler to sell? if the break light on it working even better thanks in advance.

[nissan4life]

hi
i'm looking for an exhaust manifold for d ga16de.

check this post bro,got some b13/b14 parts
viewtopic.php?f=6&t=496683

we cud line up and see,its suppose to fit bcaz most b13 and b14 interchangable and i believe the 13 & 14 use same engine block,housing & exhaust,thats why most fellas see ga16 engraved on there b14 engine and feel they got 1600cc when they have 1500c.
The only thing different suppose to be the way the intake manifold is set up,the ga16de is untop of engine and thu has better airflow to go with the extra vtec gear dat gives it the extra power that ppl love in the ga16de pimpess engines.
Give me a shout if you interested.

[falken]

good day....i am looking for a suitable lowering kit for my 13 to achieve probably like a 2inch drop front and back...msg me any info concerning this plz, i want to drop it this week. on a side note i hav some stuff to sell if anyone interested
1) complete set of tail lights
2) bess condition floor carpet
check this link for photos https://www.facebook.com/media/set/?set ... 4ab66dcd9d

call me at 7389322 ask for hansraj, im located in south

[Ted_v2]

Tien or rsr lowering kit.

[falken]

Tien or rsr lowering kit.

where can i get those bro?

[Ted_v2]

Sjr imports on the forum has a couple. Pm tuner imports too

[black start]

good day....i am looking for a suitable lowering kit for my 13 to achieve probably like a 2inch drop front and back...msg me any info concerning this plz, i want to drop it this week. on a side note i hav some stuff to sell if anyone interested
1) complete set of tail lights
2) bess condition floor carpet
check this link for photos https://www.facebook.com/media/set/?set ... 4ab66dcd9d

call me at 7389322 ask for hansraj, im located in south

teins work real good,


If I told you that you could use b12 struts front and back for a drop with decent ride quality, you would believe me?

[falken]

good day....i am looking for a suitable lowering kit for my 13 to achieve probably like a 2inch drop front and back...msg me any info concerning this plz, i want to drop it this week. on a side note i hav some stuff to sell if anyone interested
1) complete set of tail lights
2) bess condition floor carpet
check this link for photos https://www.facebook.com/media/set/?set ... 4ab66dcd9d

call me at 7389322 ask for hansraj, im located in south

teins work real good,


If I told you that you could use b12 struts front and back for a drop with decent ride quality, you would believe me?

wen u say struts do u mean complete b12 shocks wid springs and the shock head???? i was told i can use b12 shocks and cut my springs>>>>> i am inclined to believe dat wud dat achieve the same effect as the b12 struts bt i dont know if the ride quality will be d same because of the cut spring. i wana drop the car real bad cuz since i put on the rims i driving it, even do it nuh dat high it needs to be lowered

[black start]

Nah nah, use b12 front struts complete for the front and for the rear you need to use the b13 hats on the b12 shock, spring assembly.

I can't remember the actual height though, so before going ahead and buy up stuff, link with a padna with a b12 and just swap the shocks on the front and rear to see the results. That ain't taking 1 hour to do and its a real simple process....

[gts beast]

fellers , anyone have or know where I can get a sr20 gearbox crossmember bracket for the b13 ?????

[reshaadbands09]

http://www.trinicarsforsale.com/cmsAdmi ... 2_5397.jpg

tell me what yall think of this 13....ga16 with eccs (fuel injected), manual (5 foward) somebody say that this izza original beast model....idk :/

[THE SYNDICATE]

fellas it have a REAR B13 bumper in the median of the highway.

LOCATION: vicinity between el secorro and barataria overpass.

HAVE A PAIR OF MUDGUARDS ON IT!

whoever interested make a pass quick!

*i know that a vast area to comb,but jus look,u will see it!*

[nissan4life]

fellas it have a REAR B13 bumper in the median of the highway.

LOCATION: vicinity between el secorro and barataria overpass.

HAVE A PAIR OF MUDGUARDS ON IT!

whoever interested make a pass quick!

*i know that a vast area to comb,but jus look,u will see it!*

LMAO,a man must be now lose out 600-800 on a rear bumper and aint check to see if it clips good.
Fellas al yuh go fast caz if it stil there on my way home i taking it and putting it up for sale tomorrow